-
×
Fast Quick Charger 6V to 32V QC3.0 QC2.0 Mobile Charger Circuit Board Module in Pakistan
1 × ₨ 250
Subtotal: ₨ 250
-36%
3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
Availability:
3 in stock
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
₨ 350 ₨ 550
3 in stock
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
Package included:
1 x Shield V3
Based on 0 reviews
Be the first to review “CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan”
Related products
-
WIFI MODULE
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
-44%
WIFI MODULEESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
SKU: ESP8266 WIFI MODULE -
-
POWER BANK & MODULES
PD 65W Fast Mobile Charging Module Type-C Interface DC8-32V Supports 3.25A PD3.1 QC3.0 QC4.0 SCP FCP PPS Apple Samsung Fast Charging in Pakistan
-53%
POWER BANK & MODULESPD 65W Fast Mobile Charging Module Type-C Interface DC8-32V Supports 3.25A PD3.1 QC3.0 QC4.0 SCP FCP PPS Apple Samsung Fast Charging in Pakistan
- Input voltage: DC 8-30V
- Output voltage: Automatically adjust between 3.3V and 21V
- Fast charging is triggered, input voltage should be higher than 20V)
- Output power: maximum 65w (5V3A, 9V3A, 12V3A, 20V3.25A, etc.)
- Maximum output: 20V 3.25A
- Conversion efficiency: 92%~97%
- Output voltage ripple:<200mV
- No-load current:<3mA
- Input overvoltage and undervoltage protection
- Input overcurrent protection
- Output overcurrent short circuit protection
- Overall over temperature protection
- Supported charging protocols: QC3.0, QC4.0, PD3.1, PPS, SCP, FCP
SKU: PD65W FAST MODULE -
3D & CNC PRINTER PARTS
CNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
-31%
3D & CNC PRINTER PARTSCNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as END STOP.
- Released the I2C interface, you can connect to the LCD I2C or other I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible
- Worked with arduino nano.
SKU: CNC SHIELD V4 -
BMS
3S 25A Li-ion 18650 BMS PCM Battery Protection Board BMS PCM With Balance For li-ion Lipo Battery Pack Module DIY in Pakistan
-23%
BMS3S 25A Li-ion 18650 BMS PCM Battery Protection Board BMS PCM With Balance For li-ion Lipo Battery Pack Module DIY in Pakistan
- Over Charge voltage : 4.25-4.35v±0.05v
- Over Discharge voltage : 2.3-3.0v±0.05v
- Max Working current : 25A
- Max peak current : 35-40A
- Working temperature : -40—+50
- Storage Temperature : -40– +80
- Small current : 50uA
- Life cycle : more then 30000 hours
- Resistance : Less than 100mΩ
- Short Cut : Protectable,Charge can repair
- Size:56*45*4.0mm
SKU: MODULE 3S 30A 18650 BMS BOARD
There are no reviews yet.