ATMEGA 328P Pro Mini 328 Mini ATMEGA 328 5V/16MHz for Arduino in Pakistan
SKU: PRO MINI ATMEGA 328
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- 0.8mm Thin PCB
- USB connection off board
- Supports auto-reset
- 5V regulator
- Max 150mA output
- Over current protected
- Weighs less than 2 grams!
- DC input 5V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan-36%3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
SKU: CNC SHIELD V3
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
3D & CNC PRINTER PARTS
CNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan-31%3D & CNC PRINTER PARTS
CNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as END STOP.
- Released the I2C interface, you can connect to the LCD I2C or other I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible
- Worked with arduino nano.
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan-44%WIFI MODULE
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
SKU: ESP8266 WIFI MODULE
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
HC05 JY-MCU Anti-Reverse, Integrated Bluetooth Serial Pass-Through Module for Arduino in Pakistan-32%BLUETOOTH MODULE
HC05 JY-MCU Anti-Reverse, Integrated Bluetooth Serial Pass-Through Module for Arduino in Pakistan
SKU: HC05 JY-MCU BLUETOOTH ARDUINO
- Model HC-05.
- Use the CSR mainstream bluetooth chip, bluetooth protocol standards.
- Module working voltage 3.3 V.
- Potter default rate of 9600, the user can be set up.
- The core module size : 28 mm x 15 mm x 2.35 mm.
- Working current: matching for 30 MA, matching the communication for 8 MA
Nano 3.0 Controller for Arduino Compatible ATMEGA328P Nano CH340 USB Driver in Pakistan
SKU: ARDUINO NANO 3.0 CH340
- Microcontroller : Atmel ATmega328
- Operating Voltage (logic level) : 5 V
- Input Voltage (recommended) : 7-12 V
- Input Voltage (limits) : 6-20 V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 8
- DC Current per I/O Pin : 40 mA
- Flash Memory : 32 KB (of which 2KB used by bootloader)
- SRAM : 2 KB
- EEPROM : 1 KB
- Clock Speed : 16 MHz
NodeMcu V3 Lua WIFI Board Based ESP8266 ESP-12E for Arduino CP2102 in Pakistan
SKU: NODEMCU V3 WIFI CP2102
- NodeMcu Lua wifi internet of things development board based on ESP8266
- Power your developement in the fastest way combinating with NodeMcu Firmware
- The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board
- Modern Internet development tools such as Node. take advantage of the NodeMCU with the built-in API to put your idea on the fast track immediately
- It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board that has I/O pins available
TT Motor Smart Car Robot Car Gear Motor & Wheel for Arduino DIY Kit in Pakistan
SKU: TT MOTOR WHEEL
- Operating voltage: 3V~6V DC
- Maximum torque: 800gf cm min (when it is 3V)
- No-load speed: 1:48
- RPM:200(when it is 4.5V)
- Load current: 170mA (when it is 4.5V)
- Center hole: 5.3MM x 3.66MM
- Diameter: 68MM
- Width: 2.66MM