ARDUINO & MODULES
Showing all 12 results
-
BLUETOOTH MODULE
Bluetooth Audio Receiver 5V for USB MP3 Car Stereo Speaker Amplifier Adapter HiFi Dongle in Pakistan
-43%BLUETOOTH MODULEBluetooth Audio Receiver 5V for USB MP3 Car Stereo Speaker Amplifier Adapter HiFi Dongle in Pakistan
- Input Voltage : DC 5 V
- Audio Out : L R G (it must be connected to amplifier)
- Receive audio signals from mobile
- Extraordinary Range 10 meters.
- Smallest and Powerful
- Best for any kind of amplifier.
- Dimensions : 24mm x 15mm x 1mm
SKU: 5V BLUETOOTH RECEIVER -
WIFI MODULE
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
-44%WIFI MODULEESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
SKU: ESP8266 WIFI MODULE -
BUCK CONVETER
Fast Charger 5V 3A Mobile DC-DC Converter 6-24V 12V/24V to 5V 3A Car USB Charger For Phone Module in Pakistan
-49%BUCK CONVETERFast Charger 5V 3A Mobile DC-DC Converter 6-24V 12V/24V to 5V 3A Car USB Charger For Phone Module in Pakistan
- New main chip made in USA.
- The max output current 3A, long time use 2.1A, enough use.
- New design, 3 solid state ceramic capacitors(MLCC).
- Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%.
- Flat copper inductor, improve conversion efficiency
- With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device.
- Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc.
- High quality USB port.
- Output voltage indicator (RED).
- Input with reverse polarity protection diode, will not damage when input connect incorrect.
- Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable.
SKU: MODULE 12V TO 5V 3A CAR CHARGER -
BUCK CONVETER
Fast Quick Charger QC3.0 QC2.0 3V 5V 12V Mobile Charger Circuit Board Module in Pakistan
-42%BUCK CONVETERFast Quick Charger QC3.0 QC2.0 3V 5V 12V Mobile Charger Circuit Board Module in Pakistan
- for BC1.2, iPhone, Samsung agreement
- for Qualcomm QC2.O and QC3.O
- MTKPEI.1/PE2.O
- Fast Charge Protocol FCP
- Star Fast Charge Protocol AFC
- Spreadtrum Fast Charge Agreement SFCP
SKU: FAST QUICK MODULE CHARGER 12V TO 5V -
BLUETOOTH MODULE
HC05 JY-MCU Anti-Reverse, Integrated Bluetooth Serial Pass-Through Module for Arduino in Pakistan
-32%BLUETOOTH MODULEHC05 JY-MCU Anti-Reverse, Integrated Bluetooth Serial Pass-Through Module for Arduino in Pakistan
- Model HC-05.
- Use the CSR mainstream bluetooth chip, bluetooth protocol standards.
- Module working voltage 3.3 V.
- Potter default rate of 9600, the user can be set up.
- The core module size : 28 mm x 15 mm x 2.35 mm.
- Working current: matching for 30 MA, matching the communication for 8 MA
SKU: HC05 JY-MCU BLUETOOTH ARDUINO -
BUCK CONVETER
Micro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module TP 4056 With Protection Dual Functions 1A Li-ion in Pakistan
-40%BUCK CONVETERMicro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module TP 4056 With Protection Dual Functions 1A Li-ion in Pakistan
- Module performance:
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
SKU: TP 4056 MICRO USB -
ARDUINO
Nano 3.0 Controller for Arduino Compatible ATMEGA328P Nano CH340 USB Driver in Pakistan
- Microcontroller : Atmel ATmega328
- Operating Voltage (logic level) : 5 V
- Input Voltage (recommended) : 7-12 V
- Input Voltage (limits) : 6-20 V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 8
- DC Current per I/O Pin : 40 mA
- Flash Memory : 32 KB (of which 2KB used by bootloader)
- SRAM : 2 KB
- EEPROM : 1 KB
- Clock Speed : 16 MHz
SKU: ARDUINO NANO 3.0 CH340 -
WIFI MODULE
NodeMcu V3 Lua WIFI Board Based ESP8266 ESP-12E for Arduino CP2102 in Pakistan
- NodeMcu Lua wifi internet of things development board based on ESP8266
- Power your developement in the fastest way combinating with NodeMcu Firmware
- The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board
- Modern Internet development tools such as Node. take advantage of the NodeMCU with the built-in API to put your idea on the fast track immediately
- It is an integrated unit with all available resources on board. It is super simple to complement your existing Arduino projects or any development board that has I/O pins available
SKU: NODEMCU V3 WIFI CP2102 -
BUCK CONVETER
TP4056 TYPE-C USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Protection Dual Function DIY in Pakistan
-41%BUCK CONVETERTP4056 TYPE-C USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Protection Dual Function DIY in Pakistan
-
Input voltage: 5V
-
Charging cut-off voltage: 4.2V
-
Maximum charge current: 1000mA
-
Battery over-discharge protection voltage: 2.5V
-
Battery overcurrent protection current: 3A
SKU: TP 4056 TYPE-C -
-
BOOST UP CONVERTER
XL6009 Adjustable DC Step-Up Power 6009 Module DC-DC Boost Converter in Pakistan
-50%BOOST UP CONVERTERXL6009 Adjustable DC Step-Up Power 6009 Module DC-DC Boost Converter in Pakistan
- IN + enter the positive – negative input IN!
- The positive OUT – output negative OUT + output
- Test compared to the sample reference:
- 3 v input output 12 v 0.4 A 4.8 W
- The input 5 v output 12 v 0.8 A 9.6 W
- 18 w input 7.4 V output 12 V 1.5 A
- Input the 12 v output 15 v 2 a 30 w
- Input the 12 v output 16 v 2 a and 32 w
- 18 v 1.6 A 1.6 W input 12 v output
- Input the 12 v output is 19 v 1.5 A 1.5 W
- Input output 12 v 24 v 1 A 24 w
SKU: STEP UP XL6009