No products in the cart.
Module
Showing all 8 results
- BMS
3S 25A Li-ion 18650 BMS PCM Battery Protection Board BMS PCM With Balance For li-ion Lipo Battery Pack Module DIY in Pakistan
BMS3S 25A Li-ion 18650 BMS PCM Battery Protection Board BMS PCM With Balance For li-ion Lipo Battery Pack Module DIY in Pakistan
- Over Charge voltage : 4.25-4.35v±0.05v
- Over Discharge voltage : 2.3-3.0v±0.05v
- Max Working current : 25A
- Max peak current : 35-40A
- Working temperature : -40—+50
- Storage Temperature : -40– +80
- Small current : 50uA
- Life cycle : more then 30000 hours
- Resistance : Less than 100mΩ
- Short Cut : Protectable,Charge can repair
- Size:56*45*4.0mm
SKU: MODULE 3S 30A 18650 BMS BOARD - 3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
3D & CNC PRINTER PARTSCNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
SKU: CNC SHIELD V3 - 3D & CNC PRINTER PARTS
CNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
3D & CNC PRINTER PARTSCNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as END STOP.
- Released the I2C interface, you can connect to the LCD I2C or other I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible
- Worked with arduino nano.
SKU: CNC SHIELD V4 - WIFI MODULE
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
WIFI MODULEESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
SKU: ESP8266 WIFI MODULE - POWER BANK & MODULES
LED Dual USB 5V 2.4A Mobile Power Bank 18650 Lithium Battery Charger Board Digital QC Micro Type-C Lightning Support in Pakistan
POWER BANK & MODULESLED Dual USB 5V 2.4A Mobile Power Bank 18650 Lithium Battery Charger Board Digital QC Micro Type-C Lightning Support in Pakistan
- Size: 6.5 * 2.5 * 0.1cm
- Weight: 10.8G
- IR of PCM : ≤65 mΩ
- Allowed 0V change: Yes
- Constant current: 2.4A
- Dual output current: 5V 2.4A
- Input voltage B+ to B-: 3.0 – 4.2V
- Charging cable: support three type of USB Cables for iPhone Lightning & Andriod Type-C Micro USB
- Button function: Press and hold the button after standby, the LED digital screen displays the power
SKU: DUAL USB DIGITAL TYPE C MODULE - AMPLIFIER MODULES
PAM8610 6V-15V Power Amplifier Board 8610 Digital Two-Channel Dual Channel Stereo Module in Pakistan
AMPLIFIER MODULESPAM8610 6V-15V Power Amplifier Board 8610 Digital Two-Channel Dual Channel Stereo Module in Pakistan
- This plate with switching function
- SW short will turn off the power amplifier
- Working Mode : ClassD (PWM modulation type)
- Chip Type : PAM8610
- Power Range : DC6V-15V (self-protection)
- Recommended Voltage : DC12V(2A)
- Output Power : 10Wx2 (8Ω) 15Wx2 (4Ω)
- Frequency Response : 20HZ-15KHZ
- Static Current : 20MA (DC12V)
- SNR : 90% Recommended
- Speakers : 10-100W
- Input Impedance : 15K
- Output Impedance:4-8Ω
- Harmonic Distortion:<0.1%
- Size : Approx 3cmx2.5cm/1.19″x0.98″
SKU: PAM 8610 MODULE - SECURITY CAMERA & LOCKS
RFID Kit MFRC-522 RC522 RF IC Card Inductive Module with free S50 Fudan Card Key Chain in Pakistan
SECURITY CAMERA & LOCKSRFID Kit MFRC-522 RC522 RF IC Card Inductive Module with free S50 Fudan Card Key Chain in Pakistan
- Operating Current: 13-26mA / DC 3.3V
- Idle current: 10-13mA / DC 3.3V
- Sleep current: <80uA
- Peak current: <30mA
- Operating frequency: 13.56MHz
- Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
- Product physical characteristics: Size: 40mm × 60mm
- Environmental Operating temperature: -20-80 degrees Celsius
- Environmental Storage temperature: -40-85 degrees Celsius
- Environmental Relative humidity: Relative humidity 5% -95%
SKU: RFID KIT - HUMIDITY SENSOR
XH-M452 DC 12V LED Digital Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Relay Module AM2301 Probe in Pakistan
HUMIDITY SENSORXH-M452 DC 12V LED Digital Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Relay Module AM2301 Probe in Pakistan
- Description:
- power supply : DC 12V
- Temperature measurement range : -40~120°
- Humidity range : 0~100%RH
- Control precision : 0.1° 0.1%RH
- Test probe : Integrated sensor
- output : 10A delay
- Size:65*55*28mm
SKU: XH-M452 HUMIDITY TEMP CONTROL MODULE
