No products in the cart.
-28%
HIGH SPEED MOTOR
775 Motor DC 12V – 24V 3500 – 7000 RPM Flat Shaft D Type Ball Bearing Large Torque High Power Low Noise Motor in Pakistan
Availability:
965 in stock
- Brand new and high quality
- Shaft Diameter: Approx. 5 mm
- Shaft length: Approx. 17 mm
- Body length: Approx. 66.7 mm
- Front steps diameter: Approx. 17.4 mm
- Former high level: Approx. 4.7 mm
- Body diameter: Approx. 42 mm
- Motor Overall Length: Approx. 98 mm
- Diagonal installation pitch: Approx. 28.8 mm
- Mounting hole size: M4
- Mounting hole: 2
- Cooling fan: Yes
- Rated voltage: 24 V (Max. 36V)
- Current Rating: 0.16 A
- Rated Speed: 3500–7000 RPM
₨ 1,300 ₨ 1,800
965 in stock
- DC 12V, current 0.14A, speed 3500RPM
- DC 18V, current 0.15A, speed 4500RPM
- DC 24V, current 0.16A, speed 7000RPM
Features:
- The front is ball bearing and back-end is copper
- 5 groups winding
- At a voltage of 12V-24V , large torque, low noise
Package included:
1 x Motor
Video
Based on 2 reviews
Add a review
Related products
- 3D & CNC PRINTER PARTS
775 Motor Bracket Heavy Duty Plastic With Support Screws Motor Fixed Base L Shaped Plastic Body For DIY Mounting Bracket in Pakistan
-32%
3D & CNC PRINTER PARTS775 Motor Bracket Heavy Duty Plastic With Support Screws Motor Fixed Base L Shaped Plastic Body For DIY Mounting Bracket in Pakistan
- Any Color could be available.
- Usage: Fit to 775 DC motor as a shelf or holder.
- Motor mounting hole: 4 mm (suitable for M4 screw)
- Surface: Plastic
- Materials: High Strength Plastic
SKU: BRACKET 775 MOTOR - 3D & CNC PRINTER PARTS
Stepper Motor Driver A4988 3D Printer Step Stick Carrier Reprap 4-layer PCB RAMPS in Pakistan
-44%
3D & CNC PRINTER PARTSStepper Motor Driver A4988 3D Printer Step Stick Carrier Reprap 4-layer PCB RAMPS in Pakistan
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solder able ground pad below the driver IC on the bottom of the PCB
- Module size, pin out, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
SKU: A4988 MOTOR DRIVER - 3D & CNC PRINTER PARTS
Nema17 Stepper Motor 4 Wire 42 D Shaft Motor 42BYGH 1.7A (17HS4401) 3D Printer Motor CNC XYZ in Pakistan
-48%
3D & CNC PRINTER PARTSNema17 Stepper Motor 4 Wire 42 D Shaft Motor 42BYGH 1.7A (17HS4401) 3D Printer Motor CNC XYZ in Pakistan
- General Specification:
- Step angle accuracy: + – 5%(full step,not load)
- Resistance accuracy: + – 10%
- Inductance accuracy: + – 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature ———-—20deg ~+50deg
- Insulation resistance:100MΩ Min,500VDC
- Insultion Strength——–500VAC for one minute
SKU: NEMA 17 MOTOR
Muhammad Zohaib (verified owner) –
Well i got used motor with much high price. Such a disappointment. Also the model i got is rs775-385 uaed for water pump not for cnc.
Muhammad Zohaib –
MaazElectronics –
Already mention on product description d shaft motor. It is new never used. Price also low from market.
MaazElectronics –
umersoftwares (verified owner) –
The D shaft motor is great. Fits perfectly on the chuck ordered from this store. If the motor is new, it is at least tested once before it’s sent because I had to desolder the previously soldered wire strands to solder new wires.
umersoftwares –