No products in the cart.
-37%
MISTING ACCESSORIES
DH48S-S Digital Time Delay Relay AC 220V Repeat Cycle SPDT with Socket DH48S Series Mist System Delay Timer with Base in Pakistan
Availability:
99 in stock
- Dealy Range:0.01s-99.99s ; 1s-99m99s ; 1m-99h99m
- Repeat accuracy: <0.3%±0.5sec
- Mechanical life: >10000000
- Electrical Life: >100000
- Contact Type: DPDT, 2NO 2NC
- Operating ambient temperature:-10℃-50℃
- Power consumption: ≤3W
- Altitude:<2000m
- size:48mm*48mm
₨ 2,200 ₨ 3,500
99 in stock
Specification :
Model number | DH48S |
| Supply voltage | 36, 110, 220 or 380 Vac, 50/60 Hz; 12Vac/Vdc, 24Vac/Vdc |
| Tolerance | -15% … 10% at AC and -10% … 10% at DC of rated supply voltage |
| Power consumption | 2W max |
| Setting method | Dial switch |
| Indication method | 8-segment 4-digital display |
| External dimensions | 48x48x97.4 mm |
| Perforate dimensions | 45 10×45 10 mm |
| Contact rating | 3A@250Vac, 5A@28Vdc |
| Repeat accuracy | ±0.3%, ±0.05 sec |
| Setting error | ±0.5%, ±0.05 sec |
| Termination | 8 pins |
| Mounting | Panel, din rail |
| Matched socket | PF083A, PF083A-E |
| Mechanical life | 1×106 |
| Electrical life | 1×105 |
| Operating temperature | 0 to 50 °C (32 to 122 °F) |
| Operating humidity | 95% RH max, non-condensing |
| Alias name | DH48S digital timer |
Package included:
1 x Relay
1 x Base
Based on 0 reviews
Be the first to review “DH48S-S Digital Time Delay Relay AC 220V Repeat Cycle SPDT with Socket DH48S Series Mist System Delay Timer with Base in Pakistan”
Related products
- 3D & CNC PRINTER PARTS
CNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
-31%
3D & CNC PRINTER PARTSCNC Shield V4 Engraving machine module/ A4988 Driver Expansion Board for Arduino in Pakistan
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as END STOP.
- Released the I2C interface, you can connect to the LCD I2C or other I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible
- Worked with arduino nano.
SKU: CNC SHIELD V4 - WIFI MODULE
ESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
-44%WIFI MODULEESP8266 ESP-01 ESP01 Serial Wireless WIFI Module Transceiver Receiver Board For Arduino Raspberry Pi 3 in Pakistan
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
SKU: ESP8266 WIFI MODULE - 3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
-36%3D & CNC PRINTER PARTSCNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
SKU: CNC SHIELD V3 - BATTERY CHARGER
Liitokala Lii-500 LCD 3.7V 18650 18350 18500 16340 17500 25500 10440 14500 26650 1.2V AA AAA NiMH lithium battery Charger in Pakistan
-26%BATTERY CHARGERLiitokala Lii-500 LCD 3.7V 18650 18350 18500 16340 17500 25500 10440 14500 26650 1.2V AA AAA NiMH lithium battery Charger in Pakistan
- Input: DC 12V / 2A(min.)
- Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA * 4
- Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA * 4
- Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
- Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
- USB output: 5V 1000mA (only with Li-Ion 3.7V battery inserted)
- For battery sizes: diameter 8mm-26mm; height 34mm-71mm
- NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
- Li-Ion 26650, 22650, 18650,18490, 18500,
- 17500, 17355, 16340(RCR123), 14500, 10440
- Dimensions: L*W*H / 162*96*36mm
SKU: LIITOKALA Lii-500 - GEAR MOTOR
TT Motor Smart Car Robot Car Gear Motor & Wheel for Arduino DIY Kit in Pakistan
- Motor:
- Operating voltage: 3V~6V DC
- Maximum torque: 800gf cm min (when it is 3V)
- No-load speed: 1:48
- RPM:200(when it is 4.5V)
- Load current: 170mA (when it is 4.5V)
- Wheel:
- Center hole: 5.3MM x 3.66MM
- Diameter: 68MM
- Width: 2.66MM
SKU: TT MOTOR WHEEL
There are no reviews yet.