-29%
DRILL & ACCESSORIES
10MM Shank M10 & Arbor Mandrel Cutting Tool Accessories for Angle Grinder or Drill in Pakistan
Availability:
3 in stock
- Shank diameter 10mm for Drill
- Thread M10
- Size As the photo shows
₨ 1,200 ₨ 1,700
3 in stock
10mm shank M10 mandrel for angle grinder & Drill.
Suitable for cutting disc, saw blade, polishing tool, etc.
Angle grinder accessories.
This electric drill grinder connecting rod is suitable for 10mm shank drill chuck. And it is suitable for cutting disc, saw blade, polishing tool which inner diameter
is 16mm, 20mm. (The saw blade needs to use with gasket. )
Package included:
1 x 10mm shank
1 x M10 mandrel
2 x flange nuts
2 x wrench
Video
Based on 0 reviews
Be the first to review “10MM Shank M10 & Arbor Mandrel Cutting Tool Accessories for Angle Grinder or Drill in Pakistan”
Related products
-
DRONE PARTS
1Pair 1045 10×4.5 CW CCW Propeller Prop For RC Multicopter Quadcopter F450 775 Motor in Pakistan
-33%
DRONE PARTS1Pair 1045 10×4.5 CW CCW Propeller Prop For RC Multicopter Quadcopter F450 775 Motor in Pakistan
- Material: Plastic and Nylon
- Propeller diameter: 25.4cm
- Slope: 4.5″(11.43 cm)
- 100% Brand New.
- High quality and durable in use, Easy to install.
- Material: ABS
- Color: Orange, Red, Green, Black, and White for option.
- Diameter: 10 “(25.4 cm)
- Slope: 4.5 “(11.43 cm)
- Diameter of Shaft: 6.0mm
- Thickness of center: 9.0mm
SKU: n/a -
-
BATTERY CHARGER
Liitokala Lii-500 LCD 3.7V 18650 18350 18500 16340 17500 25500 10440 14500 26650 1.2V AA AAA NiMH lithium battery Charger in Pakistan
-21%
BATTERY CHARGERLiitokala Lii-500 LCD 3.7V 18650 18350 18500 16340 17500 25500 10440 14500 26650 1.2V AA AAA NiMH lithium battery Charger in Pakistan
- Input: DC 12V / 2A(min.)
- Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA * 4
- Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA * 4
- Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
- Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
- USB output: 5V 1000mA (only with Li-Ion 3.7V battery inserted)
- For battery sizes: diameter 8mm-26mm; height 34mm-71mm
- NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
- Li-Ion 26650, 22650, 18650,18490, 18500,
- 17500, 17355, 16340(RCR123), 14500, 10440
- Dimensions: L*W*H / 162*96*36mm
SKU: LIITOKALA Lii-500 -
3D & CNC PRINTER PARTS
CNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
-36%
3D & CNC PRINTER PARTSCNC Shield V3 Engraving Machine Module/ A4988 Driver Expansion Board for Arduino in Pakistan
- Using A4988 module
- Five different step mode
- Adjust the maximum current output, so as to obtain a higher rate of step.
- Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals
- Can drive four A4988 stepper motor
SKU: CNC SHIELD V3
There are no reviews yet.