No products in the cart.
3D Printer
Showing all 9 results
- 3D & CNC PRINTER PARTS
775 Motor Bracket Heavy Duty Plastic With Support Screws Motor Fixed Base L Shaped Plastic Body For DIY Mounting Bracket in Pakistan
-32%
3D & CNC PRINTER PARTS775 Motor Bracket Heavy Duty Plastic With Support Screws Motor Fixed Base L Shaped Plastic Body For DIY Mounting Bracket in Pakistan
- Any Color could be available.
- Usage: Fit to 775 DC motor as a shelf or holder.
- Motor mounting hole: 4 mm (suitable for M4 screw)
- Surface: Plastic
- Materials: High Strength Plastic
SKU: BRACKET 775 MOTOR - 3D & CNC PRINTER PARTS
Nema17 Stepper Motor 4 Wire 42 D Shaft Motor 42BYGH 1.7A (17HS4401) 3D Printer Motor CNC XYZ in Pakistan
-48%
3D & CNC PRINTER PARTSNema17 Stepper Motor 4 Wire 42 D Shaft Motor 42BYGH 1.7A (17HS4401) 3D Printer Motor CNC XYZ in Pakistan
- General Specification:
- Step angle accuracy: + – 5%(full step,not load)
- Resistance accuracy: + – 10%
- Inductance accuracy: + – 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature ———-—20deg ~+50deg
- Insulation resistance:100MΩ Min,500VDC
- Insultion Strength——–500VAC for one minute
SKU: NEMA 17 MOTOR - COOLER PC SUPPLY
Original Suoer 20A Power Supply SP-1220 S-240-12 DC12V 240W for CNC 3D Printer Peltier Air Cooler Switching Mode in Pakistan
-28%
COOLER PC SUPPLYOriginal Suoer 20A Power Supply SP-1220 S-240-12 DC12V 240W for CNC 3D Printer Peltier Air Cooler Switching Mode in Pakistan
- Model : S-240-12
- DC output voltage : 12V
- Output voltage range : ±1%
- Rated output current : 20A
- Output current ranqe : 0-20A
- Wave and noise : 75mVp-p
- Inlet stability : ±0.5%
- Load stability : ±0.5%
- DC output power : 240W
- Efficiency : 84%
- Adjustable range for DC voltage : 10.8~13.2V
- Dimensions : 20cm x10cm x4cm
SKU: SUOER SUPPLY 20A - COOLER PC SUPPLY
Original Suoer 30A Power Supply SP-1230 S-360-12 DC12V 360W for CNC 3D Printer Peltier Air Cooler Switching Mode in Pakistan
-26%
COOLER PC SUPPLYOriginal Suoer 30A Power Supply SP-1230 S-360-12 DC12V 360W for CNC 3D Printer Peltier Air Cooler Switching Mode in Pakistan
- Model : S-360-12
- DC output voltage : 12V
- Output voltage range : ±1%
- Rated output current : 30A
- Output current ranqe : 0-30A
- Wave and noise : 75mVp-p
- Inlet stability : ±0.5%
- Load stability : ±0.5%
- DC output power : 360W
- Efficiency : 83%
- Adjustable range for DC voltage : 10.8~13.2V
- Dimensions : 22cm x11cm x5cm
SKU: SUOER SUPPLY 30A - COOLER PC SUPPLY
Power Supply DC 12V 20A S-240-12 for CNC 3D Printer Peltier Air Cooler Switching Mode CCTV Camera Decoration Lights Lamps Security Pakistan
-29%
COOLER PC SUPPLYPower Supply DC 12V 20A S-240-12 for CNC 3D Printer Peltier Air Cooler Switching Mode CCTV Camera Decoration Lights Lamps Security Pakistan
- Model : S-240-12
- DC output voltage : 12V
- Output voltage range : ±1%
- Rated output current : 20A
- Output current ranqe : 0-20A
- Wave and noise : 75mVp-p
- Inlet stability : ±0.5%
- Load stability : ±0.5%
- DC output power : 240W
- Efficiency : 84%
- Adjustable range for DC voltage : 10.8~13.2V
- Dimensions : 20cm x10cm x4cm
SKU: DC SUPPLY 20A - 3D & CNC PRINTER PARTS
Stepper Motor Driver A4988 3D Printer Step Stick Carrier Reprap 4-layer PCB RAMPS in Pakistan
-44%
3D & CNC PRINTER PARTSStepper Motor Driver A4988 3D Printer Step Stick Carrier Reprap 4-layer PCB RAMPS in Pakistan
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solder able ground pad below the driver IC on the bottom of the PCB
- Module size, pin out, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
SKU: A4988 MOTOR DRIVER
