MISTING SPRAY WASHER SYSTEM
Misting system is up to eight nozzles placed in a tube and pressurized to provide a fine spray consisting of water droplets between 5 microns and 50 microns.The temperature of the summer can often make outdoor operations and events quite uncomfortable which is why mist cooling systems are so meaningful. So, these systems can be used in a wide variety of applications from sporting events to livestock yards to amusement parks. To spend time in summer with your friends or your family member out side and all that sun beating down on you crew which is hot. So the best solution is use misting spray washer they provide enough water to keep you cool but don’t soak your clothing. The beauty of misting system is the efficiency of which they can cool large outdoor spaces using a process called flash. Misting technology uses a combination of water, pumps and large fans to generate a fine mist that can lower the ambient temperature up to 35 degrees. the mist is so fine that it instantly evaporates which lowers the air temperature without getting people wet. One type of mist does not require pumps but is popular for residential and small commercial applications. Each mist cooling system uses up to eight nozzles that feed stainless steel fan blades that can stand up to years of use. The low noise means you’ll get optimum cooling without the annoying and over high sound of numerous fan blades in motion.
HOW TO ESTIMATE THE WATER USE OF A MISTING SYSTEM?
If you want to estimate water use of a misting system, there are three things you must to know about them:
- The type of nozzle
- Number of nozzles
- Frequency of use
- Water pressure of the system
So as to make a cooling mist, the size of the mist nozzle opening which is coined as the orifice is balanced by the system’s water pressure and flow rate (amount of water). Generally, the nozzles have a tendency to squirt less water at lower pressures compared to high pressures. There is fact, at lower water pressures mist nozzles will not make the grade to toil, there will be an addition in the flow rate through the nozzle so, for the higher the water pressure, the slighter the nozzle opening is needed. smaller nozzles should be used with high pressure misting systems and Larger misting should be used with low and medium pressure systems.
NUMBER OF NOZZLES
The amount of water depends on the number of nozzles used by your misting system. For determined a several factors Number of nozzles required such as the water pressure, flow rate at the spigot, size of the pipes that are delivering the water to misting nozzles.
Pumps are necessary part of misting system. The pump requires oil every 500 hours of run time. So always choose fast cooling and low, mid and high-pressure misting pump.
WHEN THE PUMP LEAKS WATER
- Check all hoses and fittings and figure out where the water is exactly coming from and then replace the part causing this water seepage issue.
- Do a thorough check with all the internal parts like the pump seals, the pistons and also check the pump crankcase if there is water in the oil.
WATER PRESSURE OF THE SYSTEM
The size of Water drops that makes up the mist is the determining factor of the cooling effect. Evaporation of each of the little drops causes cools the air around, compared to smaller droplets; bigger ones take just about one thousandth of a second longer. Chances are there for your clothes get wet, if they land on you before they are evaporated completely, on the other hand, if you being living in a fairly dry air, so this can feel amazing, as the water evaporates off of your skin.